Zde naleznete softwary a updaty ke stažení ...
Instrukce u jednotlivých updatů jsou přiloženy v pdf souborech a popsány v angličtině, případně i v němčině.
Languages: German / Japanese / English / French / Italian / Spanish / Dutch / Czech / Russian
• Transmitter control for the spoiler function can now be programmed separately for each flight phase
• Elevator offset is automatically adopted; a supplementary mixer curve for the elevator has also been introduced
in the Butterfly (Crow) menu
• Five-point throttle curve in the Power and Glider menus
• Mixer alarm menu. In this menu the user can now select the conditions which trigger an alarm when the
transmitter is switched on
• Supplementary Stop switch for the Timer function
• Model select and model copy functions now also directly from and to the SD card
• Keypad lock status saved when the transmitter is switched On and Off
• Model menu expanded to include a governor (speed regulator menu)
• The rate setting for Idle 2 has been changed from -100 to +/- 100
• Modified throttle limiter with variable centre position
• The throttle trim can now be disabled for flight phases GV1 - 3 and auto-rotation
• Five-point curve for rudder - aileron mixer
• Logical switched function for flight phases
• D/R function with centre offset, now switchable, as alternative to transmitter control travel adjustment
(AFR)
• Logical switch assignment now also for channels DG 1 & 2
• D/R for supplementary functions such as brakes, butterfly (crow), spoiler etc., with centre offset +/-
100%, for setting up a variable straight line graph
Languages: German / English / French / Italian / Spanish / Czech
• Expansion of the PCM G3 system, now with different types of modulation according to the number of
channels
• Trainer mode configuration function in the Trainer menu: unrestricted assignment of Pupil channels and
virtual channels
• The default setting for the throttle function has been changed from FailSafe to Hold mode.
• The rate setting for Idle 2 has been changed from -100 to +/- 100
• The stick-to-stick mixer function of the programmable mixers has been extended to cover the hardware
control select functionv
• Supplementary acceleration function for elevator - flap mixer
• Logical switch assignment now also for channels DG 1 & 2
• Modified throttle limiter with variable centre position
• Elevator offset is automatically adopted; a supplementary mixer curve for the elevator has also been introduced
in the Butterfly (Crow) menu
• Model menu expanded to include a governor (speed regulator menu)
• Mixer alarm menu. In this menu the user can now select the on conditions which trigger an alarm when
the transmitter is switched on
• Operating hours timer with Start / Stop function in Timer 1, up to 99 hours, according to transmitter control
• In Timer 1 the Start / Stop controls can now also be programmed separately for each flight phase.
• Expert mode for multi-flap gliders: individual transmitter control set-up function for models with multiple
ailerons, camber-changing flaps and spoilers.
• Automatic power-off function: previously the transmitter switched itself off after thirty minutes if no
function was operated (accidental transmission guard). This has been changed to an alarm function without
power-off.
